V3 amost ready for the new season. I remember how long I made the first board, very expensive and long. Now each new board is several times cheaper and faster. This one is 4’4 and I can’t wait to try it…
7 Likes
Just recieved new remote from @Felixfoiler giveaway.
This remote looks realy amazing. I can’t wait to try it with new board.
6 Likes
New board v3 completed… Tested with old flier 400a and fs vx3 remote. Just to mention I filled 65161 with "wuerth corrosion* since November 2020 and my second 65161 I filled with crc 6-66 since March 2021 and still don’t have any issue with motors…
7 Likes
Some fun today. We went with a vespa to the beach. So far the easiest way to go to the beach with two efoils.
7 Likes
Nice! I have Vespa and dream about similar setup. Great stuff!
1 Like
Still without issues with motor filled with crc 6-66… so almost 2 years. Definitely this can be corrosionx alternative…
Just some shoots with V3. Much more fun with shorter board…
2 Likes
Only possible in Montenegro! How fast you go with those wheels on the trolley?
Over here, you would be able to run this for max 5Km, then police would stop and fine you
Either you need to go faster than the police or avoid them😁
Some shoots with drone on local TV with my V2. Explaining what is efoil… Sorry because is not on English but interesting video😀
5 Likes
No words needed for FelixRemote @Felixfoiler This summer I didn’t have much time to test it. So here are some pictures and video. New level of using efoil remote. Complete with data logging. Excellent!
1 Like
Today I finally tested @Felixfoiler remote on the sea with new FS75200 and 120kv with choped 5inch prop on last 4.4 diy board. For testing purposes I didn’t put water cooling on esc so I could easily monitor temp and other parameters during ride on remote. At short break you can download and see data log on phone from sd card from reciever via wifi. Everything went perfect…
4 Likes
Today I tested rebuilded board
on the sea. This motor 65151 is filled with crc 6-66, so now more than two years in salt water wihout problems. So it can be used as alternative to corrosionX and mineral oil.
Also the board now is wrapped in CF and it’s much more lighter than before. I was worried about signal penetration of my Vx3 remote but I didn’t have any problems because the hatch is made from abs polymer.
I was surprised how it was easy to take of. Its probably because of bottom shape.
6 Likes
Looking good! Which one is your favourite, and why?
1 Like
nice stands! I use old yoga foam blocks with a slit for mast
2 Likes
Thanks, depending on the water conditions (lake, sea, waves, etc.), the smallest board with a taller mast and foldable propeller would likely be the way to go. The biggest board is mainly for learning