Yes, it will not be easy. I checked the forum and found there is FR Prop that may suit your need?
Wondering if you already checked this link or not?—https://highfly-watersport.com/
Hi Eark,
for us in EU it would be most important that you have shipping from EU warehouse.
I believe that there are currently an estimated 6 types of propellers in successful use among e-foil users around the world. The FR propeller is only one of them, and is probably the most expensive of them all. It is therefore not possible to answer which propeller would suit the most. I personally am interested in getting the propeller that will allow the greatest speed and longest cruise. However, these are two conflicting requirements, only two different propellers can meet them. So I need two different performance propeller types. Unfortunately, the current FR propeller type does not meet these requirements.
A possible solution is that you broker a contact between a Chinese propeller manufacturer. I can then provide him with all the necessary data to start producing propellers for e-foils with the highest pramaters in the world and at a favourable price.
Can you put me in touch with a Chinese propeller manufacturer? Yes or no?
Sure, will let you know after we have this kind of service. Thanks for attention on E-ark Tech
We are able to do that, but normally manufacturers like this do not know English.
(Build from Moscow! - #360 by Anatoly)
This is just one of all the other examples of a forum member buying a relatively expensive motor (Flipsky 65161) and the propeller offered with it (suitable at best for a small fishing boat on the calm surface of a small pond:-). He subsequently finds he can’t use it, so he either puts it away or has to go through the sophisticated process of reducing the diameter of the blades by grinding them down. However, such a trimming process is always trial and error. As a result, sooner or later he has to buy a new propeller. And since his budget is also reduced, his first choice is this propeller https://www.custommotorsfrance.com/product/propeller-complete/ It is a propeller that is not only one of the six favorites (as I explain above), but originally designed to power the Fliteboard e-foil, which is considered the best in the world.
understand, thanks for sharing the information with us.
Glad to let you know that we re-sell HGLTECH products now,too. We have flash sales for 65162 motors now within 48 hours.Pls check the link below for more details:
https://earktech.aliexpress.com/store/group/HGLTECH/911717331_10000001629048.html?spm=a2g0o.detail.0.0.6d6278e878Qe2F
You guys could let us know what products you would like to order from E-Ark Tech, we will try to upload more hgltech products and offer flash sales for all you needed. Welcome to leave comment below.
(How would you trim down this metal prop?)
So the topic is about the same propeller that you are offering today (8 June 2021) on your e-shop and claiming that this propeller is an accessory “for Efol”.
It’s unbelievable, the topic “How would you trim down this metal prop?” was already created almost three years ago (November 10, 2018) and to this day not a single Chinese propeller manufacturer has shown interest to start producing the correct performance type propeller.
We are interested in your proposal. Could you pls kindly check your private message, we can talk more there.
We can make propellers, and we can customize propellers for customers. We have a set of program codes for automatically generating propellers (of course, this code algorithm is verified by a lot of experiments). We can make the propellers you want according to the parameter requirements you provide. .
Diamond Dinamics, do you have also complete set to buy ?
Hi Gianvi
We develop and produce thrusters. We can also customize thrusters or motors with different thrusts for customers according to different needs. We are a professional manufacturer of motors and thrusters.
1 Like
541xx is not powerfull enough as direct drive on efoil.
There are more powerful, 46KG thrust.
V1.2 version will be shipped, or you can let you know your requirment. Thanks.
Thnx, just ordered one.
Thanks for your support, we will upload tracking number after the package is shipped.
I bought two 65161 motors from E-ARK over a year ago. Just getting my build to the finish line now. After mounting one of the motors I noticed that the motor mount has slight decouping. The outer housing of motor has very small amount of WOBBLE to its frame. I notice this wobble when lightly applying hand pressure to test for strong mechanical coupling to my mast mount.
The holes around the base are clearly warped. Very upset because I just noticed this. Anyone else see this issue? What is the fix?
E-ARK, Fritz you give good solution?
