Maybe you’re the only one using a genuine FOC mode on a sensorless 65151 ?
A back to back comparison of a VESC6 MK4 with a Flipsky FSESC200A on the same drive train, I’m looking forward to seeing that
Maybe you’re the only one using a genuine FOC mode on a sensorless 65151 ?
A back to back comparison of a VESC6 MK4 with a Flipsky FSESC200A on the same drive train, I’m looking forward to seeing that
With Vesc six, the motor runs quieter, and seems like even more efficiant. The Logs are much “cleaner”.
Due to bad cooling, and 77°C temp cutoff, 120A cant be delivered forever.
Over all, i am happy with my choice.
Seems like 100A is the limit at the moment with a bad cooling.
Gota improve the watercooling, this one was made of junk from my shop.
Quick and dirty
And no thermal coupling grease
At least, i am happy, Vesc didnt Drop any faults
Nice trip on Donau
Cooling is not made for 120A continous, but performs well enough
Amazing build!I want to use the same motor but i am not sure about waterproofing it.How did you make it waterproof?Are you having any issues?Can you link me to a thread that shows how to waterproof it or tell me how you did it?Sorry for all these questions but i’m trying to figure things out!
I did same as with my 80100
Can you share the 63100 SS bearings to bought ?
Also, which epoxy did you use to waterproof your motor ?
I use these
2 Stück Kugellager 10 x 19 x 5 mm der Miniatur 6800 Keramik weiß Kugellager ZrO2 https://www.amazon.de/dp/B07QC6T3WK/ref=cm_sw_r_cp_api_i_TLalFbBTH2NW7
Until now works good
Thanks guys !
I bought this 63100 :
On his way to me. I’ll make a quick and dirty build too running on 14S with the 130kV version.
To anyone wondering if the back bell has holes like on the picture, I can confirm it has. Here is a picture of it. The rotor is balanced as well.
10s is amazing- what prop version do you recommend?
at the moment I still drive 12s. but 10s would be just fine. the 156 works wonderfully with the 63100 and RL foil
…and your particular weight
Damn those skinny guys😉
I have in mind a cheap 8s max 150/200peak controller. Do you think that this ESC will work with this setup: 63100 outrunner / 80kg rider / Gong Curve L font wing ?
Sorry, i dont know. Test it
I guess it would Work.
I modified you prop slightly for a different 63 outrunner.
It the 63100 from Freerchobby. I just need to drill and tap holes in the back of the can.
It printed beautifully, without support or anything. I used PETG. Can’t wait to test it out
I hope it will work well
I’m also thinking about buying one, a friend of mine building electric skateboards and doesn’t like their size, so I can get these quite cheap.
Is it 140KV?
How are you going about drilling it?
Print a drilling jig?